DIO 24/16 01
3 Product Description
HI 800 205 E Rev. 1.01
Page 11 of 40
3.1.2 Safety-Related
Outputs
Each group of 8 outputs is provided with a connector on the clamps for the common
ground.
If an output channel is overloaded, it is switched off for ten seconds until the overload is no
longer present. If the module output range has a total load of more than 8 A, the outputs
are all switched off for 10 seconds and a new test is performed.
3.1.2.1
Reaction in the Event of a Fault
If the module detects a faulty signal on a digital output, the affected module output is set to
the safe (de-energized) state using the safety switches.
If a fault in the module occurs, all digital outputs are switched off.
In both cases, the module activates the
FAULT
LED.
The error code allows the user to configure additional fault reactions in the user program.
3.1.3 Line
Control
The digital outputs DO 1 through DO 8 of the DIO 24/16 01 module can be used to monitor
the own digital inputs or the digital inputs of other modules (e.g., DI 32 01) for short-circuits
and open-circuits, e.g., for an EMERGENCY STOP button complying with Cat. 4 in
accordance with EN 954-1. To this end, the outputs are pulsed and connected to the
safety-related digital inputs. In this case, the outputs assume the function of pulsed outputs.
The parameters for the line control are set via system parameters; refer to the HIMatrix
Engineering Manual for more details.
i
Pulsed outputs must not be used as safety-related outputs!
3.2
Equipment, Scope of Delivery
The following list specifies the available components and the corresponding part numbers:
Designation
Description
Part no.
DIO 24/16 01
Plug-in module with 24 digital inputs and 16 digital
outputs.
98 2200100
Table 4:
Part Numbers
3.3 Type
Label
The type plate contains the following details:
Product
name
Bar code (1D or 2D code)
Part
no.
Production
year
Hardware revision index (HW Rev.)
Firmware revision index (FW Rev.)
Operating
voltage
Mark of conformity
Summary of Contents for DIO 24/16 01
Page 34: ...9 Disposal DIO 24 16 01 Page 34 of 40 HI 800 205 E Rev 1 01...
Page 39: ......
