Diagnostics
System
Page 92 of 110
HI 803 211 E Rev. 1.01.00
Information
Representation
Range of values
Description
Interface Receive
Status
Hexadecimal
value
16#0000...FFFF
Every two bits represent the state of one interface
identified with an index 0...16. Bits 0 and 1 apply to
interface 0, and so on.
Value
Description
00
No message has been received or sent
yet, unknown status.
01
OK, no faults.
10
Last data received or sent was defective.
11
No faults during last
reception/transmission, one fault occurred
before.
Module Error
Status
Hexadecimal
value
16#00...3F
Bit-coded status of the I/O processing module:
Bit Meaning with value = 1
0
Warning related to external communication
1
Warning related to field connection
2
System warning.
3
External communication error
4
Field connection error
5
System error
6
Not used
7
Connection Status
of System Bus A
Hexadecimal
value
16#0...3
Status of the interface to system buses A:
Value Description
0
The interface is OK.
1
The interface detected an error during last
reception, now it is OK.
2
An error occurred on the interface.
3
The interface is switched off.
Connection Status
of System Bus A
Hexadecimal
value
16#0...3
Status of the interface to system buses A:
Value Description
0
The interface is OK.
1
The interface detected an error during last
reception, now it is OK.
2
An error occurred on the interface.
3
The interface is switched off.
Table 33: Diagnostic Information Displayed in the Online View for the Hardware Editor
Due to the timing behavior of the operating system, it is possible that the safety parameters are
not displayed in the diagnostics. To allow the safety parameters to be displayed in the
diagnostics, proceed as follows when opening the diagnostics:
1. Open the Control Panel and wait for all the fields to be refreshed.
2. In the Hardware Editor, open the diagnostics using the context menu of the online view and
not of the detail view!
Prior to opening the diagnostics, do not open the detail view and open as few online views as
possible (e.g., Force Editor, online test)!
Summary of Contents for HIQuad H41X
Page 1: ...Manual HIQuad X System Manual...
Page 109: ......