46
3)
Camera position preference
Position setting
You can set your favorite positions for the camera in the
near/distance view mode, and automatically move the camera to the
saved point.
①
In the near/distance view mode, bring up the Menu and
select “Camera position preference” from the ‘Options’ tab.
②
Place the camera in the location you want to save, and then
press the enter button.
③
After the setting is completed, if you press the near or
distance view button, the camera goes to the set position.
Set the camera direction
①
Press the menu button.
②
Select “camera direction” from the ‘Options’ tab.
③
Choose from a Vertical or Horizontal.
Joystick sensitivity
①
Bring up the Menu and select “Joystick sensitivity” from the
‘Options’ tab.
②
If you select the auto scroll, Speed will vary depending on
the slope of a joystick. When set to a specific speed,
regardless of the tilt of the joystick scrolling occurs at the set
speed.
4)
Initialization
①
Set the settings back to the factory defaults.
②
Bring up the Menu and Select “Initialization” from the “Options”
tab.
③
You can initialize settings in the “Options” tab, in the “OCR” tab,
