Shenzhen Hingmed Medical instrument Co.,Ltd. (Enterprise Edition) 2020-11-18
Shenzhen Hingmed Medical instrument Co.,Ltd.
instrument is verified
Power supply terminal
Connect power cable
[Start/Stop] button
In the standby mode, press the button to start
measurement;
In the measurement state, press the button to stop the
measurement.
[Emergency Stop] button
When an abnormality occurs, press the button to
restart the power supply and stop
measurement
Sleeve
Used to fix the arm during measurement
Printer cover plate button
Open the cover plate of the printer
Power switch
Switch on or off power supply
Setting button-○
Tap and hold on for 5S and then release to enter the
setting screen, press to switch setting items
Setting button-
△
Ascending
Setting button-
▽
Descending
3.3 Explanation of setting screen
3.3.1 LCD setting screen
-In the standby screen, tap and hold on the setting button "O" on the back of the
instrument for 5S, so as to enter the setting screen as shown in the figure above
-Press button "O" to move the cursor to switch items, press "
△
" or "
▽
" to numerical
addition and subtraction.
-Tap and hold on "O" again to exit the setting screen.
*In the non-setting screen, tap and hold on the setting button -
△
to switch on or off
printer. (Applicable to printer function)
3.3.2 LED setting screen
Local setting
Volume setting
Display setting
Date setting
Date setting
Year
Month
Day
Hour
Minute
Second
Enter
