TITLE
Assembly 39
WARNING: DEATH OR SERIOUS IN-
JURY CAN RESULT. BEFORE ASSEM-
BLING, READ SAFETY-GENERAL AT
FRONT OF THIS MANUAL.
OFFLOADING
DANGER: DEATH OR SERIOUS IN-
JURY CAN RESULT. USE EQUIPMENT
CAPABLE OF SAFELY HANDLING NO
LESS THAN 1,400# (635 KG.).
DANGER: DEATH OR SERIOUS IN-
JURY CAN RESULT. CLEAR PEOPLE
FROM CARRIER AND OFFLOADING
AREA. DO NOT OFFLOAD ON SOFT, OR UN-
EVEN GROUND. AVOID HIGH WORK SPEEDS
AND ‘JACKRABBIT’ MANEUVERING.
HINIKER chopper/shredders are shipped ver-
tical with self contained storage and handling
dunnage. They must be offloaded with an over-
head chain sling.
Use a chain sling Item 1 in Photo 3212 approxi-
mately 5’ long on each run. Fix EACH sling chain
hook SECURELY around both 1” diameter hitch
pins Item 2 where shown by decals Item 3. Lift
off carrier and deposit on a firm, clear and level
work area.
FIGURE 76 PHOTO NO. 3212
ASSEMBLY
Discharge chute components and hitch are
shipped in separate bundles.
CAUTION: DEATH OR SERIOUS INJU-
RY CAN RESULT. DO NOT ATTEMPT
TO “MANHANDLE” THE HITCH, OR
MAIN (TRAPEZOIDAL) CHUTE PANELS,
WITHOUT PROPER ASSISTANCE. Eg. THE
HITCH WEIGHS 125 Lbs. (57 Kg.)
1. The drive enclosure Item 1 as shown in
Photo 3212A holds an Operator’s Manual
and SMV. Remove these.
2. Remove PTO Item 2, wheels Item 3 and
wheel legs Item 4. Remove dunnage asso-
ciated therewith.
DANGER: DEATH OR SERIOUS INJU-
RY CAN RESULT. MAINTAIN OVER-
HEAD SLING ITEM 5 SNUG TO PRE-
VENT SKIDDED UNIT FROM UNEXPECTEDLY
TIPPING DOWN.
3. Remove (8) nuts holding 4 “U” clamps Item
6. The “U” clamps and their dunnage will
eventually be discarded.
4. SECURELY place a solid block approxi-
mately 12” high under each rear corner of
the machine as at Item 7.
FIGURE 77 PHOTO NO. 3212A
Summary of Contents for 5710
Page 2: ......
Page 50: ...NOTES 48 Notes ...