INSTALLATION OF REMOVABLE SWITCH HOUSING
Fig. 1
Fig. 2
©2019 Hinkley Lighting, Inc.
|
hinkley.com
|
11
Mounting Hub
(bottom of motor)
Screws
Wire Connectors
DetachableSwitch
Housing
Detachable Switch
Housing
1
3
2
Remove the 1 of 3 screws from the mounting hub and loosen
the other 2 screws. (Do not remove)
Raise and hold the DetachableSwitch housing close to the
mounting hub and push the square wire connectors together.
(Fig. 1)
Place the key holes on the DetachableSwitch housing over the
2 screws previously loosened from the adapter plate, turn light
kit until it locks in place at the narrow section of the key holes.
Secure by tightening the 2 screws previously loosened and the
one previously removed. (Fig. 1)
1
Install the DetachableSwitch housing cover to the
DetachableSwitch housing with screws provided. (Fig. 2)
Screws
DetachableSwitch
Housing Cover
