UNPACKING YOUR FAN
04
|
hinkley.com
UNPACK YOUR FAN AND CHECK THE CONTENTS.
NOTE:
Design of parts shown above may look slightly different for
your specific model of fan.
1
2
7
8
9
3
6
5
4
• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing. Remove all
parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.
• Examine all parts. You should have the following:
MARQUIS ILLUMINATED PACKAGE CONTENT
1
Blade Set of 5
2
Blade Arm Set of 5
3
Hanging Bracket
4
5
Canopy with Trim Ring
6
Ball Moisture Cover
7
8
9
Downrod Asm.
Yoke Cover
Fan Housing with Motor
*Remove rubber shipping
supports around motor, if
applicable. Save the screws.
Detachable Switch Housing Cover
Detachable Switch Housing
w/Wiring Harness
10
10
Hardware Bag
Bracket Mounting Hardware
(wood screws, screws, lock
washers, star washers, flat washers,
wire nuts),
Blade to Blade Arm Screws and
Rubber Washers,
Screws w/lock Washers -
Flush Mount (3),
Safety cable hardware
(wood screw, flat washer)
Pull Chain with Fob,
Balance Kit,
XX=FAN FINISH
YC902672Fxx
x
SWH904152Fxx-W
MH904152Fxx-W
DR94014Fxx
x
CA902672Fxx
BLI904152Fxx-W
BL904152Fxx-W
