HYBRID/TROUBLE SHOOTING
3–13
(4)
Check the insulated gloves for damage such as cracks and
break before use. Also, do not use wet insulated gloves.
(5)
Do not carry on any metal product such as a pen and scale
which may fall to cause short circuit while working.
(6)
Be sure to wear insulated gloves when it is necessary to
touch any high-voltage terminal without insulating coating.
(7)
After disconnecting high-voltage connectors and terminals,
insulate them with insulator tape without delay.
(8)
After working on high-voltage components, check for any
component or tool left, tightening condition of high-voltage
terminals and connector conditions again before connecting
the service plug.
(9)
Do not reserve the hybrid battery.
(10) Do not disassemble the hybrid battery.
! CAUTION
High voltage is applied to the hybrid battery even when the ser-
vice plug is disconnected. Further, high-alkaline electrolyte is
used.
(11) Make sure to use the insulated tools.
Recommended tools: FACON's Facom-quality insulated tools
(12) Turn the starter key to "LOCK" for resistance inspection.
(13) Turn the starter key to "LOCK" before removing/installing
connectors.
(14) Alert other workers with indication such as "High-voltage
work. Don't touch" on the vehicle during works on high-volt-
age components.
(The next page is an example of the indication. You may copy
and use it.)
INCORRECT
SHTS03ZZZ0300011
