HYBRID/TROUBLE SHOOTING
3–753
INSPECTION PROCEDURE: P0BEB (TC9A)
1.
Set the starter key to the "LOCK" position.
2.
Connect the diagnosis tool (HINO-DX) to the vehicle.
3.
Set the starter key to the "ON" position.
4.
Clear the malfunction history.
5.
Perform a test run. (accelerate and decelerate running for approxi-
mately 1 hour).
6.
Set the starter key to the "ON" position.
7.
In [Fault Information] on the diagnosis tool screen, check if
P0BEB-9A is detected.
NO
YES
1
Reproduction check [HINO-DX]
SHTS03ZZZ0300495
Is DTC P0BEB-9A detected?
Replace the inverter.
The inspection is completed.
(Temporary actuation of protection function
due to external noise)
