49
O
O
P
P
E
E
R
R
A
A
T
T
I
I
O
O
N
N
A
A
N
N
D
D
M
M
A
A
I
I
N
N
T
T
E
E
N
N
A
A
N
N
C
C
E
E
M
M
A
A
N
N
U
U
A
A
L
L
TP2000
7
T
ROUBLESHOOTING
To ensure a long and optimum working life of the forklift, do not disassemble it
unless strictly necessary. If the following troubleshooting instructions are not suffi‑
cient to restore the forklift to normal operation, contact an authorised
Hinowa
dea‑
ler.
The engine does not start
• Is there enough fuel?
• Is there enough oil in the engine?
• Is the spark plug sparking?
a. Remove the lead from the spark plug.
Clean any traces of dirt from the bottom of the spark plug, then remove the
spark plug.
b. Connect the lead to the spark plug.
c. Move the engine switch to ON.
d. Earth the side electrode and pull the starter to check that there are sparks
between the electrodes.
W
ARNING
: if there are fuel leaks, check that the area is dry before checking the
spark plug or starting the engine. Petrol fumes or fuel leaks may catch fire.
W
ARNING
: perform the checks in a well‑ventilated area.
Check the following items if the engine is running but the forklift is not working
correctly:
‑
H
YDRAULIC MOVEMENTS TOO SLOW
:
Cold oil
Bring the system to the normal operating
temperature
Wrong type of oil
Use the right type of oil
Engine speed too slow
Contact your authorised dealer
Pump broken
Contact your authorised dealer
‑
O
IL TEMPERATURE TOO HIGH
:
Wrong type of oil
Use the right type of oil
Filter clogged
Replace filter
Pump broken
Contact your authorised dealer
Defective drain valve
Contact your authorised dealer
Dirty oil
Change oil
Hydraulic circuit damaged Repair or replace
Summary of Contents for TP2000
Page 12: ...Generelt 52220012 12 35 NO ...
Page 69: ......
