33
3.1 HOLD AUTO Function
Additional
Functions
Chapter 3
3.1 HOLD AUTO Function
Functions
V/
V/
/40
A/
A/mA/10A
Description
Simply moving the test leads away from the mea-
surement object holds the measured value. This
function is useful when it is difficult to read the
displayed value in the current location or both
hands are being used to conduct the measure-
ment.
H.AUTO/REL
Measure
Beeping
sound
The measured
value is held.
HOLD
(lights up)
HOLD
(blinks)
HOLD
(blinks)
Blind zone
V/
V
: 420 mV range, less than 400 counts (other range)
A/
A
: less than 40 counts
: O.F
1.
Select the desired function and connect the
test leads to the measurement product.
2.
Press the
H.AUTO/REL
button.
("HOLD" blinks) (In the measurement of resistance,
O.F is displayed.)
3.
Connect the test leads to the measurement
object. After the measured value is stabi-
lized, an intermittent sound is generated.
("HOLD" lights up)
4.
When the intermittent sound is heard, move
the test leads away from the measurement
object. The measured value immediately
before the test leads are removed is held.
("HOLD" blinks)
HOLD AUTO is disabled in the AC/DC 420-mV
range.
Canceling the hold
mode:
Press
H.AUTO/REL
again.
(HOLD is turned off)
Saving the data:
Press
REC•MEMO
