5
_____________________________________________________________________
Chapter 2Set Up
______________________________________________________________
WARNING
To avoid electric shock when replacing the batteries,
first disconnect the connection cable from the object to
be measured.
During battery replacement, use caution not to put any
foreign materials such as a metal object into the
product to avoid damage to the product.
Before using the product after replacing the batteries,
replace the cover and screw.
Do not mix old and new batteries, or different types of
batteries. Also, be careful to observe battery polarity
during installation. Otherwise, poor performance or
damage from battery leakage could result.
Handle and dispose of batteries in accordance with
local regulations.
CAUTION
When exchanging the batteries, the circuit may sometimes
short circuit due to static electricity. As far as possible, do not
touch the base board with bare hands.
Chapter 2
Set Up
2.1 Replacing the Battery
The installation of new batteries ensures more than six
months of recording (with the Power Save function turned
ON, the recording interval set to 10 seconds or longer, no-
voltage contact input with an average pulse count of 5 or
less per second, and at 23
5 .
