154
_____________________________________________________________________________________________
6.4 File Screen
______________________________________________________________________________________________
6.4.5 Saving the Setting & Area (S_A)
Command:
SET & AREA
File comment can be entered.
NOTE
Saves setting conditions together with the current comparison area.
Loading this file restores the setting conditions and comparison area.
The loaded comparison area is not stored in instrument internal
memories A01 to A16.
The comparison area selection (see 5.4.2) is indicated as "A- -".
The loaded area is cleared by turning power off or by changing the area.
Procedure
1. Press the
FILE
key, and display the File
screen.
2. Press the left
CURSOR
key to move the
cursor to a command.
3. Select "
SET&AREA
", then press the
ENTER
key.
4. Enter a filename. For details, see 8. in
3.1.2.
5. To enter a file comment, move the
cursor to the comment field and enter a
comment as described in 4.
6. Press the
START
key to save the data;
press the
STOP
key to cancel.
Starts saving.
Cancels saving
If the amount of data is too large, the data
may not be successfully saved on the PC
card. For details, see 13.3.
It is possible to save without input any file
comment.
If a file with the same name already exists, a
warning message will appear. Rename the
file in step 4 above or save the file by one of
the following two methods:
OVER WRITE : Overwrite the existing file.
NUMBERING : Append a number to the
filename.
