Hioki 8847 Instruction Manual Download

Page: 92 / 372

5.5 Managing Files

(When

[Text]

is the selected save type)

Set the data thinning number.

Move the cursor to the

[Save Thin]

item.

Select

Select the channels to save.

Move the cursor to the save channel item.

Select

Execute the save operation.

Select

[Exec]

To cancel saving:

Select

[Cancel]

Off

Data thinning (sub-sampling) is not carried out.

1/2 to 1/1000

Set the thinning number (out of how many data items to

leave one data item remaining).

Channel will not be saved.

Channel will be saved.

Reset

Return to previous settings.

When saving settings data, a set-
tings file for automatic loading of
settings can be created as follows:
Specify the folder

[HIOKI8847]

the CF card as save target folder
and use

[STARTUP]

[Save

Name]

See: "5.4

Automatically Loading

Settings (Auto Setup Func-
tion)

" (



p.79)

Analog
Channels

Logic
Channels

Waveform Calculation

(When

[Wave Calculation]

[On]

)

File name

The maximum number of characters for the

[Save Name]

string is 123. The

maximum path length including file name is 255 characters.

About divided saving

Large quantities of waveform data can be divided and saved as multiple files.
Saving divided data creates one or more waveform files and an index (IDX) file.
Then by loading the IDX file, the data in the waveform file(s) is loaded as a
batch.

See:

"Batch load of waveform data" (



p.78)

Other limitations

Text format data cannot be loaded into the 8847.

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands