12
―――――――――――――――――――――――――――
Chapter 5 3286 (-20) Settings
――――――――――――――――――――――――
NOTE
NOTE
Output contents
Data
number
Power
measurement
Harmonic measurement
0
Line
Line
1
Display data
Display data
2
Voltage range
Range
3
Current range
THD-R
4
U
THD-F
5
Upeak
I
1
or U
1
6
UHz
I
2
or U
2
7
I
I
3
or U
3
5.4 Data Format
Holding down the
RANGE
key, as turning power
on, will display "
" and initialize all the
saved settings (RS-232C settings, SETUP function
and measurement status saving function).
The 3286 (-20) outputs measurement data at each
interval of about six seconds. The end of each
measurement data has by a CR + LF. Details of
the output data and examples are shown below.
When creating receiving software, make sure the
receiving software must recognize the first data.
The data after an interval become the first data.
For measurements of the 1
φ
P meter, SIN
φ
and
φ
are
used only as reference data.
For measurements of the 1
φ
PF meter, P, S, and Q
are used only as reference data.
For phase detection data, reverse phase may be
indicated with a minus sign (-).