4.2 Installing the Logger
44
After inspection, install the logger at the measurement site.
Be sure to read the
before installing.
Install the logger as necessary according to the following procedure.
Required Items: Stand (Accessory)
4.2
Installing the Logger
Persons wearing electronic medical devices such as a pacemaker
should not use the Z5004 strap with magnet. Such persons should
avoid even proximity to the Z5004, as it may be dangerous. Medi-
cal device operation could be compromised, presenting a hazard
to human life.
Do not apply heavy downward pressure with the stand extended. The
stand could be damaged.
• Avoid shocking the Z5004, such as by dropping. Shock can cause it to
be chipped or cracked.
• Do not use the Z5004 where it may be subject to rain, dust, or conden-
sation. Use in such conditions may cause corrosion or deterioration of
the magnet.
• If the Z5004 is brought near a magnetic memory device such as a
floppy disk, credit/debit card, or pre-paid card or ticket, the device may
become unusable due to data corruption. It can also cause damage if
brought near a precision electronic device such as a computer, TV, or
electronic wristwatch.
Using the Stand
1
Attach the stand to the strap/stand attachment
hole.
2
Stand up the logger.
1
2
Strap/stand attach-
ment hole
www.
.com
information@itm.com
1.800.561.8187
