2.1 Installing (or Replacing) the Battery
16
•The data saved to the collector and time settings are retained even when the batteries are depleted or
replaced.
•When the collector is connected to a computer via a USB cable, the battery power is not consumed
because power is supplied to the collector from the computer.
The battery status indicator does not accurately show the remaining battery capacity
when using a NiMH battery. Moreover, the battery life will vary greatly with the capac-
ity, charging conditions and repeated uses. Please take note of these points when
using it.
The device's battery status display and battery life are based on the usage of a brand-
new alkaline battery.
The
indicator appears when battery voltage becomes low. Replace
the batteries as soon as possible.
Using a NiMH Battery
When the logger will not be used for long time
To avoid corrosion and damage to this instrument from battery leakage,
remove the batteries from the instrument if it is to be stored for a long
time (1 week).
Summary of Contents for LR5092
