30
Inserting/Replacing Batteries
2.2 Inserting/Replacing Batteries
Insert two LR6 Alkaline batteries. Before measurements, check that the battery level
is sufficient. When the battery charge is low, replace the batteries.
CAUTION
Stop measurement and then replace the batteries. Replacing the
batteries during measurement may damage the data.
IMPORTANT
Batteries
The battery indicator display and battery life are based on the use of a new
alkaline battery.
Use of nickel-metal hydride batteries
When nickel-metal hydride batteries are used, the battery indicator display does
not operate correctly.
The battery life varies depending on the capacity, charging condition, deterioration
due to repeated use, etc. Use batteries in consideration of the factors above.
Use of manganese dioxide batteries
Do not use manganese dioxide batteries as the instrument may not be able to
measure or communicate.
• Even when the batteries are low in charge or replaced, the data and
measurement conditions saved in the instrument are not deleted.
• When the battery voltage drops to the point where the
instrument cannot operate properly, the screen on the
right is displayed. Measurement or communications
cannot be made in this condition. When the Z2003 AC
Adapter is connected or the batteries are replaced, the
instrument returns to the normal operation.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
sales@GlobalTestSupply.com