04
However, note that the device may be overheated
depending on the frequency of the workpiece or
screw types. As a countermeasure, prepare spare
screwdrivers of the same model to extend the tact
time and use them alternately, or review the
selection of screwdriver models.
◦
Do not overload the device so much that it cannot
clutch. Otherwise, it may cause a failure of the
motor.
◦
Do not touch the screwdriver while it is rotating.
Otherwise, it may cause an injury or a failure.
◦
Keep your hands and face away from the rotating
section while in use. Otherwise, it may cause an
injury.
◦
Remove the bit from the screwdriver when you are
not working.
◦
If you cannot attach / remove the bit in the way
described in this document, please make contact
with our service section.
◦
Fix the workpiece with jig / clump while in
working.
◦
Do not use the switch lever as a hanger. Otherwise,
it may cause an accident or an injury.
◦
Do not give a strong impact or excessive force.
Otherwise, it may cause a failure.
◦
Do not operate the screwdriver with wet or oiled
hands.
◦
Do not operate the FOR / REV switch before the
screwdriver completely stops. Otherwise, it may
cause a failure.
◦
Do not disassemble / remodel this device.
Otherwise, it may cause a failure.
Maintenance and Inspections
◦
Turn off power and remove the power plug from
the outlet when the device is not in use for a long
time.
◦
Remove the accessories from the screwdriver and
store them in the package box when it is not in use
them for a long time.
◦
Inspect the device regularly to confirm there are
no damages. If you use it with damages, it may
cause a fire or an electric shock.
◦
When you clean the device, turn off the power and
remove the power plug from the outlet.
Otherwise, it may cause a fire or an electric shock.
◦
Use dry cloth to wipe of dust or stains. The dust
may absorb moisture to allow current to flow,
causing a fire.
◦
Store the device in a place where the appropriate
temperatures and humidity are controlled.
◦
Do not store the device in an unstable place or a
place with vibrations. Otherwise, it may cause a
failure.
◦
Keep the device out of reach of anyone but people
involved in the workpiece.
◦
We recommend genuine HIOS parts for
replacement.
Summary of Contents for BLG-4000BC2
Page 50: ......
Page 51: ......
Page 52: ...HIOS Inc 1 35 1 Oshiage Sumida ku Tokyo Japan 131 0045 www hios com ...
