■
Operation parameters
17
/
52
Fig.7-5 [HIOS] setting screen (5/6)
Fig.7-6 [HIOS] setting screen (6/6)
7.1 Password input
A password must be entered in order to display the [HIOS] setting screen.
Touch the numeric keys displayed on the screen to enter the password. (The factory default setting is an eight-digit password
{81040000}, and a password of up to eight digits can be set.)
Touch the [BS] button to delete the last digit.
Touch the [CLR] button to delete all digits.
Touch the [ENT] button to log in with the password.
When the correct password is entered, the [HIOS] setting screen is displayed. If the password is not correct, a warning
message is displayed. If no password is entered for one minute, the main screen is automatically displayed again.
Fig.7-4 Password input screen
Please Enter Password
1 2 3 4 5 BS
ENT
6 7 8 9 0 CLR ESC
Level 2 or above
Summary of Contents for DCD-40L
