www.cap-homey.com
11
respectively and enable the user isolation function, with PC1 connecting to AP1 via
wireless network card and PC2 connecting to AP2, PC1 and PC2 cannot connect to
each other. This function is for the isolation between the wireless clients of different
SSIDs.
802.11 Mode:
Select a mode according to the type of wireless client.
Turn Off:
Disable all of the wireless connection functions.
11b Mode:
Select this mode if there is only 11b mode client existing in your wireless
network.
11g Mode:
Select this mode if there is only 11g mode client existing in your wireless
network.
11b/g/n Mixed Mode:
Select this mode if there are 11b, 11g and 11n clients existing
in your wireless network.
Channel:
The channel used by the Smart Host. User the drop-down list to select
other valid channel ranging from 1 to 13.
Channel Bandwidth:
Set up the bandwidth to improve wireless performance. When
there are 11b/g and 11n clients in the wireless network, select 802.11n mode (wide)
with 40M bandwidth; when there is only 11n client absent in the wireless network,
select 20M bandwidth. If the wireless network is in 11n mode, select 20/40M
bandwidth to facilitate the transmission.
Channel Extended:
Set up the operation frequency of the wireless network
under 11n mode.
Wireless Connection Security
WPA2 (Wi-Fi Protected Access version 2) provides higher security than
Wireless Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA).
Encryption Mode:
Select a correspondent encryption mode for the SSID. Here you
select
WPA2-PSK
.
PSK:
Type a string of 8 to 63 characters in ASCII format or 64 hexadecimal
