www.cap-homey.com
13
6
Configure the Camera
In the configuration before the camera, please follow these steps to correct
connection configuration.
1. LAN connections
Use a network cable to connect the smart host (LAN port) with the camera
network port
2. Log in Smart host web interface
Go to the "Basic configuration" - > "Equipment list", check the camera IP
and Mac address
3. Reserved Address
Go to the "Basic configuration" - > "LAN configuration," MAC and reserve
the HOST address binding up the camera.
Note
: 1. If the user use wired connection HOST, then connect the cable
MAC and HOST the reserved address binding, if the user HOST using a
wireless connection, then connect the wireless MAC binding reserve and
HOST addresses.
2. Configure the need to restart the camera.
4. sPort Forward
Go to the "Basic configuration" - > "Port forwarding/single port forwarding",
to configure port forwarding (for remote monitoring) .
