www.cap-homey.com
15
Host?
To allow the users on the Internet to access the servers in your LAN, including mail
server, WEB and FTP, you have to establish a Virtual Server. Follow the steps to
configure the Smart Host.
1)
Establish a server in your LAN and make sure it can be accessed by other users
in the LAN. Meanwhile, you need to know the port numbers of the servers, such
as Port 80 for WEB server, Port 25 for SMTP and Port 110 for POPS mail server.
2)
On the main page of Smart Host, select
Port Forwarding
.
3)
Type the service ports in the LAN and WAN, such as
80
for the Start Port and the
End Port.
4)
Type the IP address of the server in the LAN. If the IP address of your WEB
server is 192.168.0.1, type
192.168.0.1
.
5)
Confirm the protocols used by the servers, such as TCP, UDP or ICMP. If you are
not sure about the protocol, select
Both
.
6)
Click
Enable
to save and activate the settings.
8
Technical specifications
Power Supply 12V～ 1.5A
Operational
Environment
Temperature range
：0℃～50℃
Operating humidity
：10%～90% RH No condensation
Accessories
Smart Host
Adapter
Quick start guide
Technical
Support
Support the wireless AP, routers, and four switches
Support
standard of
IEEE802.11n,
backward compatibility
IEEE802.11b, IEEE802.11g
WPA/WPA2, WEP,NONE Security
1x 10/100M WAN Port
4x 10/100M Ethernet (LAN) interface,
support hidden wireless SSID function
System security logs
DDNS
Port Forward(Single Port Forward and Range Port Forward)
support simple network time protocol (NTP)
supports the automatic selection of wireless channels
supports ZigBee, WiFi,, Enocean, Z-Wave protocols of smart home
terminal management, etc
support Android, IOS version APP remote management
