Hipo INKJET plotter manual
30
Figure 9-2 Replacing nozzles
4 Cleaning cartridge
If some dots or lines are missing in the output graph, you need to clean
the cartridges.
①
pick out the cartridge out of the cartridge box, use a piece of cloth or
delicate paper to mop the nozzle clean, and put it in the cartridge box. Then
print a short graph to compare.
②
press ‘clear’ when the plotter is on, the nozzle will clean itself
automatically.
(3) About environment
1, the power source should have a reliable grounding system. Do not
share the power source with other high-power electrical equipment. The
Fluctuating voltage should not exceed 10%.
2, make sure that the metal wheels is reliable and touches the ground.
3, the plotter is a delicate optoelectronic device, thus DO NOT press the
casing too hard. Do not pull out the raster at pleasure.
4, when the plotter is off, do not play with the cartridges or move it with
haste to avoid generating electric current in the process which would damage
the mainboard.
5, Power-off measures should be taken if the plotter is not to be used for a
long time to avoid damages caused by other reasons.
6, stop using the plotter when abnormal situation occurs, eg: when there’s
burned taste, smoke, abnormal noise. Please get in touch with the supplier
and ask for maintenance staff to fix the problem.
7, keep the surface of the plotter clean and avoid fluids or other things to get
trapped inside the plotter.
8, when the plotter is in motion, please do not put your hand your other
objects near the cartridge, in case of personal injury or bad influence on the
quality of printing.
9, when you want to move the plotter, please firstly loose the Casters lock
brakes one by one, and then gently move it. When it is in the right location,
please lock the brakes back.
