Congratulations on your purchase of the Game of Drones® Hiro Build-It-Yourself kit.
When you’re done, you’ll have your very own Hiro drone ready to bind to a transmit-
ter. We designed this kit to be easy to use, fun, and educational. When you’ve com-
pleted the Game of Drones® Hiro Build-It-Yourself kit, you will not only have a drone
to fly, you’ll also know more about how drones work. This may be your first drone you
build, but don’t let it be your last. There’s a lot of building out there, and you’ve just
taken your first step.
Content list
Your Game of Drones® Hiro Build-It-Your-
self kit should include the following:
One Game of Drones® Hiro airframe;
Five lengths of plastic trim (four longer, one
shorter);
Cable ties;
Four wood motor mounts;
One KK 2.1 HC Multi-Rotor Control Board
with Programmer;
Two clockwise (CW) RCMC 2212 1000Kv V2
motors;
Two counterclockwise (CCW) RCMC 2212
1000Kv V2 motors;
16 small black screws;
5 servo wires;
1 grey ribbon cable;
Four RCMC 30Amp SimonK Firmware Elec-
tronic Speed Controllers (ESCs);
One power distribution board;
Four tabs of mounting tape;
Four propellers;
Four sets of propeller adapters;
One frame cap
Tools you’ll need:
Phillips screwdriver
Allen wrenches size 2 mm, 2.5 mm
Small-nose pliers
Wire cutters
Scotch or masking tape
Pliers or a ½-inch mini rachet
Pen
Other parts you’ll need:
RC transmitter
Receiver compatible with your transmitter
A 2200mAh 3S 30C LiPo battery with an
XT60 plug
