28
Installation BXS
Release 01 04/2022
Remove the premounted transport protection caps.
Seal unused sockets and plugs with your desired type of protection
screws which you can order separately.
Note:
For applications in trains, seal all unused ports with metal
protection screws if the German Regelung Nr. EMV 06 (Regulation
No. EMV 06) for electromagnetic compatibility of railway vehicles with
railway radio services is to be applied.
2.2.2
Grounding the device
Figure 4: Position of the ground connection on the device; tightening torque.
Depending on the characteristic value of the supply voltage, the device either
has connections for functional ground or protective ground.
Perform the following work steps:
Ground the device via the ground screw.
WARNING
ELECTRIC SHOCK
Ensure that the cross section of the ground conductor is at least the same
size as the cross section of the power supply cable.
Failure to follow this instruction can result in death, serious injury, or
equipment damage.
4.4 lb-in
0.5 Nm
Summary of Contents for BXS
Page 50: ......