16
EAGLE 20
Release 09 04/2012
2
Assembly and start-up
2.1
Installing the device
Before installing and starting up the device, note the safety instructions (see
page 5
onwards).
2.1.1
Overview of installation
Two or more devices configured with the same IP address can cause
unpredictable operation of your network.
The devices have been developed for practical application in a harsh
industrial environment.
On delivery, the device is ready for operation.
The following steps should be performed to install and configure a EAGLE 20
Industrial ETHERNET Firewall product:
Unpacking and checking
Connect the terminal block for voltage supply and signal
contact and connect the supply voltage
Install the terminal block, start-up procedure
Install the device on the DIN rail, grounding
Connect the data lines
2.1.2
Unpacking and checking
Check that the contents of the package are complete
(see page 33
“Scope of delivery”)
.
Check the individual parts for transport damage.
WARNING
UNINTENDED EQUIPMENT OPERATION
Establish and maintain a process for assigning unique IP addresses to all
devices on the network.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
Summary of Contents for EAGLE 20 MM/MM
Page 36: ......
