EAGLE 20
Release 09 04/2012
19
Note:
The shielding ground of the industrial connectable twisted pair lines is
connected to the front panel as a conductor.
Figure 8: Mounting on the DIN rail
Grounding
The device housing is grounded by means of the separate ground screw.
(see fig. 1)
.
2.1.6
Connecting the data lines
10/100 Mbit/s twisted pair connection
These connections are RJ45 sockets.
10/100 Mbit/s TP ports enable the connection of terminal devices or
independent network segments according to the IEEE 802.3 10BASE-T/
100BASE-TX standard.
These ports support:
Autonegotiation
Autopolarity
Autocrossing (if autonegotiation is activated)
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
State on delivery: autonegotiation activated.
The socket housing is electrically connected to the front panel.
Summary of Contents for EAGLE 20 MM/MM
Page 36: ......