20
EAGLE 20
Release 09 04/2012
100 Mbit/s F/O connection
These connections are DSC connectors.
100 MBit/s F/O ports enable the connection of terminal devices or
independent network segments in compliance with the IEEE 802.3
100BASE-FX standard.
These ports support:
Full or half duplex mode
State on delivery: full duplex FDX
Note:
Make sure that the SM ports are only connected with SM ports, and
MM ports only with MM ports.
Note:
LED or LASER components in compliance with IEC 60825-1
(2007):
CLASS 1 LASER PRODUCT
CLASS 1 LED PRODUCT
Light is emitted from the optical connections or from the ends of the
connected optical fibers that are connected to the optical connections.
LIGHT EMITTING DIODE CLASS 2 M, wave length 650 nm, power
<2 mW in accordance with DIN EN 60825-1:2003-10.
LIGHT EMITTING DIODE CLASS 1 - CLASS 1 LED PRODUCT
Figure
Pin
Function
1+2
One line pair: receiver path
3+6
One line pair: sender path
4,5,7,8
Not used
Table 2:
Pin assignment of a TP/TX interface in MDI-X mode, RJ45 socket
WARNING
EYE DAMAGE DUE TO LASER LIGHT
Do not look into the beam or view the beam directly with optical instruments
(magnifying glasses, microscope) at a distance of less than 100 mm
(3.94 in).
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
8
7
6
5
4
3
2
1
Summary of Contents for EAGLE 20 MM/MM
Page 36: ......
