EAGLE 20
Release 09 04/2012
21
2.1.7
Connection to the network
Connect the device via the INTERNAL port to the internal network or the
local computer that you want to help protect.
Connect the device via the EXTERNAL port to the external network, e.g.
the Internet. This network is used to set up the connections to the external
device or external network.
2.2
Display elements
After the operating voltage is applied, the software starts and initializes itself.
Afterwards, the device performs a self-test. During these actions, the
STATUS LED flashes. The process takes around 40 seconds.
STATUS
P
2
1
LS/DA
2
1
FAULT
V.24
Summary of Contents for EAGLE 20 MM/MM
Page 36: ......
