6
EAGLE 20
Release 09 04/2012
Housing
Only technicians authorized by the manufacturer are permitted to open
the housing.
The device housing is grounded by means of the separate ground screw.
(see fig. 1)
.
Make sure that the electrical installation meets local or nationally
applicable safety regulations.
The device must be installed in the vertical position
(see fig. 8)
.
Install the device in a fire protected shell according to EN 60950-1.
Environment
The device may only be operated at the specified surrounding air
temperature (temperature of the surrounding air at a distance of up to
5 cm (1.97 in) from the device) and relative air humidity specified in the
technical data.
Install the device in a location where the climatic threshold values
specified in the technical data will be observed.
Use the device only in an environment within the pollution degree
specified in the technical data.
DANGER
HAZARD OF ELECTRIC SHOCK
Never insert sharp objects (small screwdrivers, wires, etc.) into the inside of
the product.
Failure to follow these instructions will result in death, serious injury,
or equipment damage
.
CAUTION
EQUIPMENT OVERHEATING
When installing the device, make sure any ventilation slots remain free.
Maintain a clearance of at least 10 cm (3.94 in).
Failure to follow these instructions can result in injury or equipment
damage.
Summary of Contents for EAGLE 20 MM/MM
Page 36: ......
