8
EAGLE 20
Release 09 04/2012
National and international safety regulations
Make sure that the electrical installation meets local or nationally
applicable safety regulations.
CE marking
The devices comply with the regulations contained in the following
European directive(s):
2004/108/EC
Directive of the European Parliament and the council for standardizing
the regulations of member states with regard to electromagnetic
compatibility.
In accordance with the above-named EU directive(s), the EU conformity
declaration will be at the disposal of the relevant authorities at the
following address:
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Tel.: +49 1805 141538
The product can be used in the industrial sector.
Interference immunity: EN 61000-6-2:2005
Emitted interference: EN 55022:2010
Warning!
This is a class A device. This device can cause interference in
living areas, and in this case the operator may be required to take
appropriate measures.
Note:
The assembly guidelines provided in these instructions must be
strictly adhered to in order to observe the EMC threshold values.
FCC note:
This device complies with part 15 of FCC rules. Operation is subject to the
following two conditions : (1) This device may not cause harmful
interference; (2) this device must accept any interference received,
including interference that may cause undesired operation.
WARNING
EYE DAMAGE DUE TO LASER LIGHT
Do not look into the beam or view the beam directly with optical instruments
(magnifying glasses, microscope) at a distance of less than 100 mm
(3.94 in).
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
Summary of Contents for EAGLE 20 MM/MM
Page 36: ......