Hirschmann GREYHOUND GRS1020 Reference Manual Download

Page: 488 / 619

Redundancy

12.1

Network Topology vs. Redundancy Protocols

148

UM Config GRS

Release

8.0

09/2019

12 Redundancy

12.1

Network Topology vs. Redundancy Protocols

When using Ethernet, a significant prerequisite is that data packets follow a single (unique) path

from the sender to the receiver. The following network topologies support this prerequisite:



Line topology



Star topology



Tree topology

Figure 25: Network with line, star and tree topologies

To maintain communication in case a connection fails, install additional physical connections

between the network nodes. Redundancy protocols help ensure that the additional connections

remain switched off while the original connection is still working. When the connection fails, the

redundancy protocol generates a new path from the sender to the receiver via the alternative

connection.

To introduce redundancy onto Layer 2 of a network, you first define which network topology you

require. Depending on the network topology selected, you then choose from the redundancy

protocols that can be used with this network topology.

12.1.1

Network topologies

Meshed topology

For networks with star or tree topologies, redundancy procedures are only possible in connection

with physical loop creation. The result is a meshed topology.

Figure 26: Meshed topology: Tree topology with physical loops

Summary of Contents for GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands

Hirschmann GREYHOUND GRS1020, Reference Manual

Search results

Summary of Contents for GREYHOUND GRS1020

Reviews:

Related manuals for GREYHOUND GRS1020

Brands by name

Popular brands