MACH 4002
Release 1.0 10/05
19
V
Please observe the
ff.
V
Close the whole of the front surface beside the media modules with pa-
nels. This guarantees optimum shielding and convection. The slots for the
media modules function identically. They can be selected in any order.
V
Remove the covering panel to insert the media module.
V
Note the positions of the blue insertion catches (see Fig., step 1).
V
Insert the media module almost as far as it will go into the desired slot
(see Fig., step 2).
V
Make sure that there is a good connection between the multiple plugs of
the media modules and the female multipoint of the system bus.
V
Insert the media module as far as it will go into the desired slot by closing
the blue insertion catches (see Fig., step 3).
V
Screw the two knurled screws in the front panel of the media module flush
with the frame of the chassis.
2.1.3
Assembling the SFP modules (if required)
V
To fasten a SFP module, first remove the protective cap of the SFP mo-
dule.
V
Insert the SFP module with the closed lock into the socket until you hear
it snap in.
Note:
Only use SFP modules from Hirschmann.
Step 1
Step 3
Step 2
Summary of Contents for MACH 4002 48+4G
Page 40: ...40 MACH 4002 Release 1 0 10 05 ...
Page 42: ... ...
