K360
Series
CY-G
Barcode
35*10.5mm
BUTTONS AND CONNECTORS
5
When there is something wrong with your TV, you can try turning off the TV and restarting it. You can also refer to the following chart
for problem and solution tips.
• Confirm power cord is plugged into the AC outlet and the AC outlet is getting electricity.
• Attempt to power on unit using the power button on both the TV and the Remote.
• Check for the correct output connection on the external source and for the correct input connection on the TV.
• Make sure you have made the correct selection for the input mode for the incoming signal.
• Check the volume settings.
• Check if Mute mode is set "on" .
• If black and white picture first unplug TV from AC outlet and replug after 60 seconds.
• Check Color Setting if picture is black and white.
• An electrical appliance may be affecting TV set. Turn off any appliances
,
if interference goes
away, move appliance farther away from TV.
• Insert the power plug of the TV set into another power outlet.
• Confirm that TV still has power and is operational.
• Change the batteries in the remote control.
• Check if the batteries are correctly installed.
• Clean the front of the remote control (LED window).
• If using a universal remote, be sure to select the TV mode on the remote.
• If the remote still does not work:
-
Remove and
r
einstall the batteries co
r
rectly to reset the remote
or
install new batteries.
-Press the Power button to turn
on
the
TV
. With a universal remote
if
you have reset or changed the batteries
you will need to reprogram the remote for the other units.
• Check if there is obstruction between the remote control and the
TV
.
TIP:
If
you have a digital camera
/
camera phone, you can aim the front
of
the remote at camera lenses (at
this time, the camera should set
on
camera mode,
no
t play mode). Observe the camera screen while
pressing a button
on
the remote control; you should see flashing light
on
the screen.
If
there is
no
light
observed, the remote control is not working.
Y
ou need to repair or replace the remote control.
POSSIBLE SOLUTIONS
SYMPTOMS
No sound or picture
Picture is normal, but no sound
Sound but no picture or black
and white picture.
Sound and picture distorted or
appear wavy.
• If using an external antenna
,
check the direction
,
position and connection of the antenna.
• Adjust the direction of your antenna or reset or fine tune the channel.
Sound and picture is blurry or
cuts out momentarily.
• After switching to Cable, please auto program the channels. The TV will “remember” all the channels then
the TV will allow you to surf the channels with [CH /V] buttons.
[CH /
I have connected an external
source to my TV and I get no
picture and/or sound.
HELP TOPICS
9
TURNING THE TV ON FOR THE FIRST TIME
8
Note:
If you are using a cable or satellite box and you have connected it to the TV using a Coaxial cable, you should select the cable option. Be sure the cable or satellite box is turned
on before starting the channel scan. If you use a cable or satellite box connected to A/V, Component or HDMI, you don't need to scan for channels.
REMOTE CONTROL
4
W
all-Mount hole pattern VESA (mm)
W
all-Mount screw size (mm)
2
Follow instructions provided with the Wall-Mount bracket.
•
If you are not sure of your ability to do complete the installation, contact a
professional installer or service technician for assistance. The manufacturer is
not responsible for any damages or injuries that occur due to mishandling or
incorrect assembly.
•
Be sure to use the provider spacers between the TV and the bracket when
attaching the mount.
ACCESSORIES LIST
1
INSTALLING THE STAND
2
Video Effect:
Connect an outdoor VHF/UHF antenna.
ANT
Menu Language
Time Setting
Picture Mode
TV Source
Connect Headphone for audio out of the TV.
HEADPHONE
AUDIO
OUT/
OR
OR
BEST (HDMI)
BETTER
(COMP)
GOOD
(AV)
HDMI / COMP / AV
Connect an HDMI cable or Comp/AV Adapter from an
external A/V equipment.
Connect an optical cable from an external digital
audio system.
DIGITAL AUDIO OUT
VGA & VGA AUDIO
Connect a VGA cable and an audio cable from the PC.
CHANGE THE BATTERIES
OR
Connect a USB device for browsing photos and movies.
USB
Mobile Hard Disk
VHF/UHF Antenna
Cable
ANT OUT
SPECIFICATIONS
7
Align the front of the stand column
with the front of the base, then insert
the stand column into the base
making sure that the groove in the
stand column aligns with the ridge in
the base. Secure the stand column to
the base with 3 Screws A (M5 x 12) .
Secure the stand to the TV with the 4
Screws A (M5 x 12).
Align the stand cover with the stand
column, then secure the stand cover
to the stand column with 1 Screw A
(M5 x 12) . Make sure that the bottom
of the stand cover is flush against the
top of the stand column.
NOTES
Product image is only for reference, actual product
may vary in appearance. Carefully place your TV
facedown on a soft, cushioned surface to prevent
damage to the TV or scratching to the screen.
1. Slide the back cover to open the battery compartment of the remote control.
2. Insert two
AAA
size batteries. Make sure to match the (+) and ( - ) ends of the batteries with
the (+)and ( - ) ends indicated in the battery compartment.
3. Close the battery compartment cove
r
.
1
Gently push and slide
2
Insert the batteries
3
Gently push and slide
L
Y
P
B
P
R
R
COMPONEN
T
IN
VIDEO
A
V IN
AUDIO
L
Y
P
B
P
R
R
COMPONEN
T
IN
VIDEO
A
V IN
AUDIO
VGA
PC/DVI AUDIO IN
PC IN
DIGITAL
AUDIO OUT
USB
DC 5V 0.5A(MAX)
Choose
Y
our Menu Language
ENTER
Enter
Select
MENU
Return
EXIT
Exit
English
Fran
ç
ais
Set menu language to English,
Fran
ç
ais, or Espa
ñ
ol
Choose
Y
our Picture Mode
Home mode default settings are recommended for in-home
use. ENERGY STAR
@
qualified.Retail mode is intended for
in-store display and resets video settings at Power On.
Home Mode
Retail Mode
Select Return
EXIT
MENU
Enter
ENTER
Exit
Reduces total power consumption
Choose
Y
our TV Source
Antenna
Cable
Select Return
EXIT
MENU
Enter
ENTER
Exit
Select if using an antenna for standard or HD TV
Connect your TV’s power cord to a power outlet, then press
power. The initial setup screen opens. Press [
►/ ◄
] button to
select your language, press [ENTER] button to confirm.
Press [
►/ ◄
] to select your Picture Mode: Home Mode or
Retail Mode, press [ENTER] button to confirm.
If
you select Retail Mode, a message appears “ Are you
sure you want retail mode?
”
Select
“Y
es” to continue,
or
select “No” to change your selection.
For energy saving, we kindly suggest you select the Home
Mode.
Setting Time Zone
:
Select the local time zone according to
your region.
Setting the Time
: Press [
▲/
▲
] to select the number you want
to set and press [
►/ ◄
] to set.
Press [
▲
/
▼
] to select your TV Source: Antenna
o
r Cable,
press [ENTER] button to confirm.
If you press [EXIT] to exit the scanning, a message appears
“Please Run Channel Auto Scan”, you should scan channels
from the menu of Channels
Choose
Y
our Time Setting
ENTER
Enter
Select
MENU
Return
EXIT
Exit
If Automatic, options are automatically set by TV source
Mode
Time Zone
Daylight Savings
Y
ear
Month
Day
Time
Auto
Off
2012
January
01
01:10 AM
TV CONNECTORS
6
Check the jacks for position and type before making any connections. Loose
connections can result in image or color problems. Make sure that all connections are
tight and secure.
V
V] don’t work when I
V
set the Channel to Cable?
They work with the Air setting?
1
1.
If
you want to attach the
TV
to a wall-mount bracket (not provided), you
should first remove the stand if it is pre-attached. Make sure the TV is laid
face-down on a clean, safe, and cushioned surface.
If you want to attach the TV to a wall-mount bracket(not provided), you should
first remove the stand if it is pre-attached .
INSTALLING A WALL-MOUNT BRACKET
3
Remote control does not work.
Follow the illustrations below to complete the installation steps.
2
Back View
Stand cover
Stand column
1
Ridge
Groove
3
User Manual
Quick Setup Guide
Remote Control
Screw A (M5 × 12) × 8
(M6 × 30) × 4 (40K360MN)
(M6 × 45) × 4 (46K360MN)
Spacer × 4
Batteries: AAA × 2
Screw B
200 × 200 (40”)
400 × 400 (46”)
M6
Espa
ñ
ol
Weight
LCD Panel Minimum size
(diagonal)
Screen resolution
40K360MN
46K360MN
Model Name
Dimension
Without Stand
Width: 36.29 inches (921.8 mm)
Height: 21.74 inches (552.3 mm)
Depth: 2.28 inches (57.9 mm)
Width: 36.29 inches (921.8 mm)
Height: 2.28 inches (57.9 mm)
Depth: 8.86 inches (225 mm)
Width: 41.63 inches (1057.3 mm)
Height: 24.74 inches (628.5 mm)
Depth: 2.4 inches (61 mm)
Width: 41.63 inches (1057.3 mm)
Height: 27.06 inches (687.5 mm)
Depth: 9.84 inches (250 mm)
25.4 lbs (11.5 kg)
28.7 lbs (13 kg)
34.2 lbs (15.5 kg)
38.8 lbs (17.6 kg)
40 inches
45.8 inches
1920 × 1080
1920 × 1080
Audio power
7 W + 7 W
8 W + 8 W
Power supply
Receiving
systems
120 V ~ 60 Hz
Receiving channels
Tuner type
Environmental conditions
VHF: 2~13 UHF: 14~69 CATV: 1 ~ 125
Digital Terrestrial Broadcast (8VSB): 2 ~ 69
Digital cable (64/256 QAM): 1 ~ 135
NTSC
ATSC / QAM
Component Input
VGA Input
VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)
480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080P/60Hz
HDMI Input
RGB / 60 Hz (640×480, 800×600, 1024×768)
YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080P)
Frequency synthesized
Temperature: 41°F ~ 95°F (5°C ~ 35°C)
Humidity: 20% ~ 80% RH
Atmospheric pressure: 86 kPa ~ 106 kPa
With Stand
Analog
Digital
Without Stand
With Stand
To prevent internal damage to the TV and ensure the TV is mounted securely, use
only the 4 screws in the Screw B pack.
WARNING
Screw B
Bracket (1.5~2.5 mm)
Spacer × 4
Screws B
9.5~12.5 mm
W
all-mount Bracket
Screw
Spacer
the
TV
’s rear cover
Power on/o
ff
Select HDMI source
Select component source
Display favorite list
Select input source
Infra-red transmitter
Select TV /
A
V / VG
A
/ USB source
Adjust closed caption mode
Used when Roku Streaming
Stick connected
Zoom button
Media content control
function buttons
Used when Roku Streaming Stick
connected
Audio select button
Mono/Stereo/SA
P
operation
MENU button
Select sound mode
Select picture mode
Set the sleep timer
Go to the previous channel
Display the information banner
MUTE button
Next channel
Previous channel
Display the channel name
Direct channel selection
Dash button
Select a digital sub-channel
Media content
control function buttons
Move Up/Down/Left/Right
or adjust settings
Decrease volume
Increase volume
Close the menu
2. Attach purchased bracket (1.5~2.5 mm thickness) on the TV with the 4 screws
in the Screw B pack.
MENU
Display the on-screen menu to setup your
TV
’s features.
INPUT
Select the di
f
ferent input signal sources.
Adjust the volume.
CH /
VOL+/-
Select the channel.
(Power button)
T
urn on the TV or put the TV in standby mode.
Caution:
The TV continues to receive power even in standby mode.
Unplug the power cord to disconnect powe
r
.
Item
Description
ANT/CABLE
Connect an antenna or cable TV to this jack.
HDMI
HDMI (High-Definition Multimedia Interface) provides an
uncompressed, all digital audio/video interface between this
TV
and
any HDMI-device, such as a set-top box, Blu-ray disc playe
r
,
or
A/V
receive
r
.
COMPONENT IN
Connect to a DVD playe
r
, Digital Set-
T
op-Box,
or
other
A/V
devices
with component (YP
B
P
R
) video and audio output jacks.
AV IN
Connect to the composite video and audio (L/R) output jacks
o
n
external video devices.
VGA
PC/DVI AUDIO IN
Connect to a PC or other devices with a VGA or DVI interface.
/AUDIO OUT
Connect headphone or analog sound system using RCA Y-cable
(1/8"-stereo mini to L/R phono-not provided).
DIGITAL AUDIO OUT
Connect an audio amplifier to this jack.
USB
Port for Digital Media Player and for software update.
HDMI 1/ARC
/AUDIO
OUT
DIGITAL
AUDIO OUT
USB
DC 5V 0.5A(MAX)
VIDEO
Y
P
B
P
R
L -AUDIO- R
COMPONENT IN
AV IN
ANT/CABLE
HDMI2/MHL
HDMI3
PC/DVI AUDIO IN
PC IN
VGA
AC power cord
MENU
INPUT
VOL+
CH
CH
VO
L
-
