STEP 1. Attach the TV stand or wall mount bracket (not included)
Attach the TV Stand
(For steps to attach the wall mount see page 8)
CAUTION:
Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount brackets.
The LED display is very fragile and must be protected at all times when installing the legs that form the stand. Be sure to protect the
TV screen from getting scratched or damaged by any hard objects. In addition, DO NOT exert pressure on the front of the TV at any
time because it could crack.
To attach the left and right leg that form the stand:
Follow the illustrations below to complete the installation steps:
1. To protect the screen from scratches or other damages to the TV, carefully place it face down on a soft, flat surface.
2. Remove the 2 legs from the foam and then insert the legs into the bottom slots of the TV.
3. Use the screws that came inside the carton with your TV to secure each leg tightly.
leg
leg
Screws: M4×20
Screws: M4×20
For 50H7GB*/ 55H7B*
7
Summary of Contents for 50H7GB series
Page 22: ...ES G1540A2 1 ...
