Hisense 55H9000E Plus, Quick Start Manual

13

Comcast

......0178, 10178, 10463, 11463, 10748, 11314, 11660, 

10171, 11204, 11326, 11517, 11641, 11780, 11785, 11892, 11963, 
12002

Cox Communications

......0178, 10178, 1326, 1463

Dish Network

......505, 627, 538, 720, 659

If the code associated with your Cable or Satellite provider is 
not listed, does not work or you cannot locate the instructions to 
program your remote, call your local Cable or Satellite provider's 
customer service center.
If your Cable or Satellite provider does not have a code available, 
please contact us at one of the phone numbers on Page 2.

Using Your Cable Set-top Box or Satellite Receiver 

Remote as a ‘Universal’ Remote

If you prefer to use your Cable Set-top Box or Satellite Receiver 
Remote as a ‘Universal Remote’, then visit the Support page to 
view a list of the codes.

Pairing the Remote Control

1.  Pair the remote to the TV after you power it on. Keep the 

remote control within 10 feet from the TV. Press and hold the      

[   ] button at least 3 seconds to start pairing.

2.  If the remote paired successfully then a confirmation will 

display on the screen. If it did not pair successfully then an 

'unsuccessful' message will display. Repeat step 1.

NOTE: 

•   If an unknown error occurred with the remote then it could 

have been caused by interference. Try to remove what's 
causing the interference and pair it again.

•  If an unknown error occurred in the remote control while the 

battery power is normal, you can take out the batteries and 
press any key for 1~2 seconds, then the remote control can 
work normally. 

•  The remote cannot be paired to the TV while the TV is in 

standby mode.