background image

10

Making Connections

    LAN  (Wired setup)  

Connect your TV to your network by connecting the LAN port on the back of your 

TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the 

illustration below.

·

We recommend you to use a modem or router that supports Dynamic Host 

Configuration Protocol (DHCP). Modems and routers that support DHCP 

automatically provide the IP address, subnet mask, gateway, and DNS, so you 

don’t have to enter them manually. Most home networks already have DHCP. 

TV JACK

Modem Cable

LAN Cable

LAN Cable

External Modem

(ADSL / VDSL / Cable TV) 

IP Sharer (Router)

(with DHCP server)

 

LAN

    USB    

 

Connect the USB1.1

 

and USB2.0 devices such as hard drives, USB sticks and 

digital cameras for browsing photos, listening music and watching

 

movies. 

TV JACK

 

NOTES

When connecting a hard disk or a USB hub, always connect the mains adapter of 

the connected device to the power supply. If a USB 1.1 or USB2.0 device requires 

more than 500mA or 5V, the USB device may not be supported. Max supported 
current for USB 3.0 device is 1A

 

(only for some models). Exceeding the max 

supported current may result in damage or data loss. 
Certain digital cameras may not be compatible with the TV.

DC 5V   0.5A(MAX)

USB

USB

 DC 5V   1A(MAX)

Summary of Contents for 55U8G




























Reviews: