11
1. Remove the battery cover along the arrowed direction.
2. Insert new batteries making sure that the (+) and (-) of
battery are matched correctly.
3. Re-attach the cover by sliding it back into position.
NOTE:
Use
the included
2 standard AAA(1.5volt) batteries. Do not use
rechargeable batteries.
Replace batteries with new ones of the same
type when the display becomes dim, or after 6 months.
If you reload batteries after removing the old ones, previous settings will
be lost.
Do not recharge non-rechargeable batteries.
Do not mix different types of batteries such as alkaline, carbon-zinc, or
rechargeable batteries
.
Do not mix old and new batteries
.
Batteries are to be inserted with the correct polarity
.
Exhausted batteries are to be removed from the product
.
Using
the
Remote
Control
Insert the Batteries
Storage tip
The clip on the back of the unit can be used to store the remote
control.
How to Use
To operate the room air conditioner, aim
the remote controller to the signal receptor.
The remote control will operate the air
conditioner at a distance of up to 23’ (7m) when
pointing at signal receptor of the air conditioner.
Signal receptor
ON
/OF
F
MODE
FAN
SW
IN
G
SL
EE
P
SUPE
R
SM
AR
T
IFEE
L
DI
MME
R
TIM
ER O
N
TI
M
ER O
FF
CLOCK
ON
OFF
ON
OFF
Holder
NOTE:
In the Cooling mode, the temperature can be set between
61°F and 86°F (16°C and 30°C).
In Fan Only mode, the temperature cannot be set.
Press the PLUS button to raise the temperature. Press the
PLUS button once to increase the set temperature by
1°F (1°C)
.
PLUS
Press the MINUS button to lower the
temperature. Press the MINUS
button once to decrease the set temperature by
1°F
(1°C).
Temperature
MINUS
To change the temperature display between
°C and °F
press both the Plus and Minus Adjust buttons at the same time.
ION (Optional)
Press the ION button to start or stop the Plasma Generator.
When the
ION
indicator light of the appliance flashes,
Plasma Generator will turn on.
t
he
■
■
■
■
■
■
■
■
