15
The TIMER indicator on the appliance lights up.
3.When the desired time is displayed on the LCD, press the
TIMER ON button to confirm it.
A “Beep” will be heard, and “ON” stops flashing.
TIMER ON/OFF
It is convenient to set the timer with TIMER ON/OFF buttons.
The TIMER ON button can be used to turn on the unit
automatically at
the time you set.
Using the TIMER
1. Press TIMER ON, Then "On 12:00" flashes on the LCD.
2.Press the UP or DOWN button to get your desired time of day
to turn on the appliance.
Press the UP or DOWN button once to increase or
decrease the time setting by 1minute.
Press and hold the UP or DOWN button for 2
seconds to
increase or decrease the time setting by 10 minutes.
Press and hold the UP or DOWN button for a longer time
to increase or decrease the time setting by 1 hour.
■
■
■
TIMER ON
Increase
Decrease
ON
The CLOCK must be set before using the TIMER function.
NOTE:
Normal
Sounds
When your air conditioner is operating normally, you may hear
sounds such as:
■
Air movement from the fan.
■
Clicks from the thermostat cycling.
■
Vibrations or noise due to poor wall or window construction.
■
A high-pitched hum or pulsating noise caused by the
high-efficiency compressor cycling on and off.
4.After your desired time is displayed for 5 seconds, the clock
will display on the remote control display instead of the
desired
time.
SWING
Press SWING once to change vertical airflow direction. Press
again to hold the airflow louver at desired direction.
NOTE
:
Airflow is automatically adjusted to a certain angle in accordance
■
■
with the operation mode after turning on the unit.
The direction of airflow can be also adjusted to your own
requirement by pressing the SWING button.
■
Do not turn the vertical adjustment louvers manually, to
prevent damage. Turn off the unit first and cut off the
power supply, then restore power again to reset the louver.
SWING
To
cancel
Timer
On
Press TIMER ON button again, when a "beep" can be heard and the
indicator disappears, the TIMER ON mode has been canceled.
It is similar to set TIMER OFF, you can make
the appliance unit switch off automatically at the time you set.
TIMER OFF
NOTE:
3. Press CLOCK button again once the real time is set.
2. Use the Up and Down buttons to set the correct time.
Clock function
1. You can set or adjust the real time by pressing CLOCK button
.
CLOCK
