F
lat
Panel
Unit Body
Any gap will lead to leak or frost.
unit:mm(in.)
/LTXLGSLSH
*DVSLSH
PRGHO.%WXK
1
Stoppers
(4) Slightly lift the front panel upward in order
to release the combined parts of upper side of the
front pane
(3) There are
IRXU
stoppers inside of the f
lat
panel.Check to ensure that there is no gap
between f
lat
panel and unit body.
4.3.4 Install Front Panel
(1) Firstly, put the
four
joints of the front panel back
into the grid, and then push inside to make the one
tightly fasten
, finally, install six crews for the front
panel and three crew covers for air outlet crews.
(2) Press f
lat
panel down , make the two joints of the
front panel tightly fasten.
5.1 Piping Materials
(1) Prepare locally-supplied copper pipes.
(2) Select the piping size from the following table.
(3) Select clean copper pipes making sure there
is no dust and moisture inside the tubes. Before
connecting pipes,blow the inside of the pipes with
nitrogen or dry air,to remove any dust or foreign
materials.
When removing f
lat
panel, do not
apply strong
forces by hitting, etc.
It
may break the unit body.
R410A
Summary of Contents for AVS-07UR2SABA
