36
820846
Some functions are not available and cannot be selected with certain programmes; an acoustic
signal and a flashing light will indicate such cases (see EXTRA FUNCTION TABLE).
After disconnecting the dryer from the power mains, all settings will be reset to their default
factory values, except for the acoustic signal loudness, anti-crease, and child lock setting.
CHILD LOCK
To activate or deactivate the child lock, press the positions (8)
START
DELAY
and (10)
ANTI CREASE
simultaneously and hold them for at least
3 seconds until the symbol
(9) lights up or goes off, respectively.
If the child lock is activated, programme or additional functions cannot
be changed. The child lock remains active after the dryer is switched
off. Therefore, it has to be deactivated before a new programme can be
selected. It can also be switched off during the drying process.
10
8
9
8
10
+
820846en.indd 36
820846en.indd 36
23. 11. 2021 15:47:24
23. 11. 2021 15:47:24