background image

Report possible damages 

immediately to the place 

you bought it. In this case 

retain packing.

It is advisable to wait at 

least four hours before 

connecting the appliance to 

allow the oil to flow back in 

the compressor.

Adequate air circulation 

should be around the 

appliance, lacking this leads 

to overheating. To achieve 

sufficient ventilation, follow 

the instructions relevant to 

installation.

The appliance must not be 

locate close to radiators or 

cookers.

Make sure that the mains 

plug is accessible after the 

installation of the appliance.

Wherever possible the back 

of the product should not be 

too close to a wall to avoid 

touching or catching warm 

parts (compressor, 

condenser) to prevent the 

risk of a fire, follow the 

instructions relevant to 

installation.

For electrical connection 

carefully, follow the 

instructions given in this 

manual.

Unpack the appliance and 

check if there are damages  

on it. Do not connect the 

appliance if it is damaged. 

drawers, doors etc. to  

stand on or as supports.

Frozen food must not be 

refrozen once it has been 

thawed out.

Do not consume ice 

popsicles or ice cubes 

straight from the freezer 

as this can cause freezer 

burn to the mouth

and lips.

Installation Important!

caution!

Care and cleaning

Before maintenance, switch 

off the appliance and 

disconnect the mains plug 

from the mains socket.

Do not clean the appliance 

with metal objects, steam 

cleaner, ethereal oils, 

organic solvents or abrasive 

cleansers.

Do not use sharp objects to 

remove frost from the 

appliance. Use a plastic 

scraper.

6

Hisense Refrigerator

Summary of Contents for FUV126D4AW1




















Reviews: