background image

Warmest setting.

Control panel

The  control  panel  that  controls  the 
temperature  inside  the  freezer  compartment 
is located the 

  freezer.

lower

  : Eliminate alarm sound button.

Alarm :  extensive temperature indicator.  
Power : electrical power indicator.  
Super : Super Freeze indicator. 
Super Freeze : Super Freeze button. 

SUPER F REEZE ( Button)

If  you  need  the  temperature  inside  the 
freezer  to  drop  quickly,  please  press  this 
button and indicator of super will be on. The 
unit runs in 

Super Freezer .

 

If  you  need  the  appliance  to  stop  the  mode 
of 

Super  Freeze

,  please  repress  the  Super 

Freeze(button) , the indicator of super shuts 
off.

Attention! 

 

The  freezer  will  automatically 

quit super freeze mode after 

hours, at the 

same time, super indicator will shut off .

48 

ALARM FOR F REEZER

If the power of appliance has been cut for a 
long time or stopped for any reason ,and the 
inside  temperature  has  reached  the  higher 
degree (

ı

-10°C)then it in working.

Starting up and temperature regulation

Insert the plug of the connection lead into 
the plug socket with protective earth contact.

Setting 

Off

 means: 

Turn the nob to  the Off position, the  freezer 
will  be  stopped.  Turn  the  knob  clockwise 
beyond the Off, the freezer will be running.

Setting 

Cold

 means: 

Setting 

Colder 

means:

Lowest temperature, coldest setting. 

Important!

-Normally  we  advise  you  select 

setting  of  Mid,  if  you  want  the  temperature 
warmer  or  colder  please  turn  the  knob 

setting accordingly.

When you turn the knob to lower which can 
lead  to  the  more  energy-saving.  Otherwise, 
it would result the high energy-consuming.

Important!

-High  ambient  temperatures 

(e.g. on hot summer days) and a cold setting 
on  the  temperature  regulator  (position 
Colder)  can  cause  the  compressor  to 

Reason:

  when  the  ambient  temperature  is 

high,  the  compressor  must  run  continuously 
to  maintain  the  low  temperature  in  the 
appliance.

to 

cold or colder 

run 

continuously !

When  temperature

˘

-10°C,Excessive 

temperature indicator shuts off.

When  temperature

ı

-10°C,The  indicator 

light  begins  to  flash,  and  at  the  same  time, 
the  alarm  sounds  3  times  per  10  seconds. 
After 2 minutes, the alarm  will automatically 
stop,  and  the  Excessive  temperature 
indicator will be on

 without  flash.

During the alarm of freezer, press       

ˈ

the alarm sound is stopped ,and the 
excessive temperature indicator is  on but  
no  flashing.

(button)

8

Hisense Refrigerator

Summary of Contents for FUV126D4AW1




















Reviews: