5
STEP 1. Attach the TV stand or wall mount bracket (not included)
Attach the TV Stand
(For steps to attach the wall mount see page 7)
CAUTION:
Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount brackets.
The LED display is very fragile and must be protected at all times when installing the legs that form the stand. Be sure to protect the
TV screen from getting scratched or damaged by any hard objects. In addition, DO NOT exert pressure on the front of the TV at any
time because it could crack.
To attach the left and right leg that forms the stand:
1. Remove the package protection material from each side of
the TV to begin taking the TV out of the carton.
Note: In order to protect the TV panel, we recommend that you
place the TV on the curved foam that came inside the box.
Make sure to face protect the screen by placing the TV face
down on the curved foam.
2. Take off the two side covers by removing the screws.
The curved front foam
The curved front foam
Screws
(M4×12)
Screws
(M4×12)
The side cover
The side cover
TV
TV