pag. 34
Installation, Use and Maintenance Manual - HKFD1EC/C Series
English
• Spare parts must correspond to the requirements defined by the Manufacturer Company.
• In case of dismantling of the unit, follow the relevant antipollution norms.
N.B. When using the unit, the installer and the user must take into account and place remedy to all the other types of risk connected with the
sistem. As an axample risks deriving from entry of foreign bodies, or risks deriving from the conveying of dangerous gases that are inflamma-
ble or toxic at high temperature.
3.3 Preliminary operations
.
• Check the perfect integrity of all components.
• Check that in the packing all the accessories for the installation and the relevant documentation, are included.
• Transport the packed section as close as possible to the installation place.
• Do not put tools or weights over the packed unit.
3.4 Choice of the installation place
• Place the unit on a solid structure that shall not causes vibrations and that is solid enough to support the weight of the machine.
• Do not place the unit in rooms where inflammable gases, acids or aggressive and corrosive substances may be present. These could dama-
ge the different components in an irreparable way.
• Foresee a minimum free space as shown on the following figures, to make possible the carrying of scheduled and not scheduled maintenan-
ce; in order to do maintenance to Bioxigen system, allow accessibility from lower side around supply section with DX coil.
C
EILING
FALSE
-
CEILING
450 mm
MINIMUM FREE SPACE FOR
CHECKING AND MAINTE
-
NANCE
Model HKFD1EC/C
A (450 mm)
