Operational Instructions and Function Adjustment
LOGO
Set
LOGO
to enable or disable the startup logo.
When you select
Off
, the startup logo is not displayed upon power-on. When you select
On
, the
startup logo is displayed upon power-on. The default value is
On
.
Note
The startup logo is displayed only when the LCD monitor is shut down in AC mode and restarted.
Signal Input
Set
Signal Input
to select an input signal format.
The options include
Auto
,
DVI
, and
DP
, each of which corresponds to a signal input channel. The
default value is
Auto
.
Select
DVI
or
DP
to switch to the corresponding signal input channel.
After you select
Auto
, the system automatically identifies the signal input channel.
Note
The LCD monitor automatically enters sleep mode when it detects no output signals for several
seconds, and the power indicator lights on in orange.
While the LCD monitor is in sleep mode, the system automatically wakes up display when
detecting an input signal.
After you select
Auto
, if the LCD monitor is connected to both DVI and DP channels, DVI input is
used by default. To switch to the DP channel, select the
DP
option.
Monitor Info
Tap
Monitor Info
to view the basic monitor model, resolution, serial number, firmware version,
product use duration, and backlight use duration.
All Settings Reset
Tap
All Settings Reset
to set all menu parameters to the default settings.
Note
After you press
OK
, all menu parameters are restored to the default settings.
20
