Installation
VESA Bracket Installation
The monitor is suitable for the standard VESA 100 x 100 mm mounting arm frame.
CAUTION
Use support arms authenticated by VESA.
Caution:
Use a supporting arm that can bear a weight of at least 12 kg. The VESA interface
of the monitor has been designed with a security coefficient of 6 (be able to
support a weight 6 times of the monitor weight). In the medical system, support
arms with a proper security coefficient must be used, for example, IEC 60601-1.
Install the monitor to the arm frame:
Use M4 screws for connection. Note that the valid entrance length for the monitor ranges from 8 mm to
10 mm.
Rear view
Side view
The base can adjust the
tilting angle by 15°
11
