Safety Information and Precautions
temperature and moved into a room or the room where it is located experiences fast temperature
rise. Turn on the monitor only when the condensation disappears. Otherwise, the monitor may be
damaged.
Do not cover or block any ventilation holes on the device housing. When the monitor is installed
in a closet or other closed environments, keep a certain gap between the monitor and sides of the
closet.
To avoid brightness change caused by long-term use and maintain stable brightness, it is
recommended that you use the monitor at low brightness.
Keep the high-frequency electrotome away from this monitor, and cables or devices connected to
this monitor. The high-frequency electrotome, when turned on, may interfere with nearby devices.
The OSD menu of the monitor may be activated by interference, affecting the monitor function.
The image display may be abnormal due to interference, affecting the viewing effect.
It is recommended that you clean the LCD monitor exterior periodically to extend its service life.
Do not perform cleaning and maintenance when the LCD monitor is energized. Disconnect the
LCD monitor power cable whenever possible.
Without authorization of the manufacturer, do not modify the equipment.
It is strongly recommended that you prepare a backup monitor for important tasks. If the
equipment is not used for a long time, disconnect the equipment from the power socket to protect
it from damages caused by transient voltages.
To completely power off the monitor, remove the power plug from the power socket.
Description and Maintenance of the LCD monitor
Preventive maintenance is not required. However, the monitor needs to be regularly maintained to
make the monitor in the optimal state and run securely. We recommend that you regularly test the
functions and security of the monitor, for example, at least once a year.
The screen is a key component of the LCD monitor and requires periodic maintenance.
Do not squeeze the edges of the LCD monitor or frame. Failure to comply may cause display
failure.
Do not touch or press the screen with any sharp object. Failure to comply may damage the screen.
Do not use organic solvents such as alcohol and gasoline, or chemical reagents such as acid and
alkali to contact the housing or monitor, which may lead to gloss reduction, fading, and image
quality reduction of the housing or monitor.
Do not clean the monitor housing or screen with any diluent, benzene, wax, and abrasive cleaning
agent that may damage the monitor housing and screen.
It is recommended that the surfaces of the monitor housing and panel be cleaned with special
screen cleaning cloth.
When necessary, after the monitor is shut down, wet a small piece of clean soft cloth with water,
and properly clean the housing and monitor to remove the dirt on the surface gently.
Important Information
III
