Installation
1.
Before installing the wall-mounted bracket, put the whole machine on a firm, clean, and padded
table. The whole machine is heavy, so ensure that the installation table is firm and reliable.
2.
Remove the screws from the mounting holes in the rear shell.
3.
To ensure firmly install the machine, the length of the screws (M6) in the wall-mounted hole in the
rear shell should be 8-10 mm. Too long screws will cause irreparable damages to the whole
machine.
CAUTION
Use support arms authenticated by VESA.
The VESA interface of the monitor has been designed with a security coefficient of 4 (be able to
support a weight 4 times of the monitor weight). In the medical system, support arms with a proper
security coefficient must be used, for example, IEC 60601-1.
Hanger and accessory
(excluded)
6
